wholesale China impedance calculator pcb counter sink Supply for wholesale

Plated half holes which is also called castellated holes, they’re normally designed at the edge of printed circuit boards and plated with copper, and they’re mainly used for board-on board connections, mostly where two circuit boards with different technologies are combined.

Most of the plated half hole PCBs are a type of modules which are small and high density with fine pitch components, this type of circuit boards are made with GPS Modules, Wifi Modules, Bluetooth Modules, GMS Modules, GPRS Modules and other smart modules.

Basically plated half holes are not suitable for V-score process, because the copper at the hole will be rolled up to cause serious burs, routing process is a better solution to ensure smooth edge.

The guidelines of designing plated half holes

● Normally the minimum half hole size is 0.8mm, it can be min 0.55mm with A-TECH capability
● The routing tolerance for half hole is +/-0.15mm
● The minimum distance from pad to pad is 0.25mm
● Use the larger hole diameter if possible
● Use the larger outer layer pad on both sides if possible
● Connect inner layer pads to the plated holes if possible to bring more stability and help to avoid burrs.
● Routing process is preferred and ENIG finish is preferred.

A-TECH have manufactured a large number of printed circuit boards with half hole design for various module products, and we have obtained rich experience to control high quality, the minimum half hole size we can build is 0.55mm.

o******u

Exclusive use of high quality materials is anticipated in the manufacturing processes of press fit pins pcb. These materials are pinpointed through direct experience and selected from among the best and most innovative on the market.

g******o

Useful design: press fit pins pcb is designed by a group of creative and professional experts based on the findings of their investigation and research of customers' needs. It can reduce the electrical signal loss and provides the highest efficiency

d******f

A-TECH press fit pins pcb presents a perfect marketing effect with its appealing design style. Its design comes out from our designers who have put their efforts on the innovation of design day-and-night. It can reduce the electrical signal loss and provides the highest efficiency

d******k

The innovative design gives A-TECH press fit pins pcb more aesthetic appeal. Its solderable surface is protected from the oxidation

t******b

Thanks to the team of diligent professionals, A-TECH impedance calculator pcb is manufactured according to the requirement of lean production. Its working panel is coated with a photo-sensitive epoxy-based ink, which can ensure its insulation resistance

c******s

A-TECH CIRCUITS Co., Ltd. Standardized production mode is adopted to standardize every step in the production process, so as to achieve the purpose of comprehensively improving the resource utilization rate, reduce the loss of materials in the production process to the greatest extent, optimize the production cost, and thus ensure the [ 10219] On the premise of the same quality and performance, the added value is high and the price is better. Compared with similar products, the cost performance is high, and the purchase of our products can save more costs.

Product Message

*Name

Phone

*E-mail

*Content