buried edge plating pcb fit hole hot-sale for sale

Company Advantages
1. During the production of A-TECH edge plating pcb , it is manufactured under a reliable and safe environment. The treatment of glass is monitored closely to prevent any potential risks. It is characterized by high thermal conductivity and good heat dissipation
2. 2oz copper pcb produced by A-TECH CIRCUITS Co., Ltd. is highly marketable. With a solder mask, it enjoys a good electrical insulation property
3. The product has a smooth surface. Honed or polished under advanced machines, it achieves a beautiful surface without any burrs or defections. It is widely used in different electronics industries, such as telecommunication and consumer electronics

Press fit hole PCB, or called press fit pins PCB, they’re component holes with copper plated through and with tighter tolerance than standard PTH, the tolerance of standard PTH is +/-0.075mm(3mil), but the tolerance of press fit hole is normally +/-0.05mm(2mil).

Press fit holes are used as holes to fit the leads of connectors that will not be soldered but pressed into the holes. In order to accommodate lead and hole to tightly fit together, the tolerance on both are well defined, the typical tolerances for the press fit holes depends on the type of connector that is used and it’s the connector manufacturer who specifies this.

Press fit technology reduces PCB assembly time and effort considerably, and press fit pin eliminates the need for soldering, this cuts process time and cost, and boosts production output capacity. With no need to solder modules, engineers enjoy great flexibility in design. The module can easily be mounted on top or bottom of the PCB at no extra cost and effort.

A-TECH drill press fit holes with new drill bits and control specially in manufacturing process to ensure finished hole size within tolerance as specified.

Company Features
1. A-TECH CIRCUITS Co., Ltd. is a manufacturing company based in China that goes from strength to strength. We are experienced in designing and producing 2oz copper pcb .
2. Due to technical strength, A-TECH CIRCUITS Co., Ltd. produced products with stable performance.
3. A-TECH CIRCUITS Co., Ltd. will continue to perform technological innovation and product creation. Get info!

r******i

The manufacturing process of A-TECH 2oz copper pcb covers a few major steps. It goes through board cutting, bending, welding of electric parts, PCB handling, and assembling. WGD Auto Parts is a professional auto parts manufacturer since 2006, leading car parts suppliers for car engine parts, chassis parts, car electrical components

v******b

The quality control of A-TECH 2oz copper pcb is conducted rigorously. It has been certified under relevant pool standards, such as ANSI, APSP, and UL. WGD Auto Parts is a professional auto parts manufacturer since 2006, leading car parts suppliers for car engine parts, chassis parts, car electrical components

g******w

A-TECH edge plating pcb is an integrated result of multiple technologies. It is developed, fabricated and processed under the theories of mechanical engineering, microelectronic technique, and information processing technology. WGD Auto Parts is a professional auto parts manufacturer since 2006, leading car parts suppliers for car engine parts, chassis parts, car electrical components

j******e

A-TECH 2oz copper pcb has been tested according to the requirements of international IEC/EN standards. It has been tested in terms of low-frequency phenomena (flicker and harmonics) and high-frequency conductive currents, voltage, and power. WGD Auto Parts specializes in the production of car electrical components such as starter brush holder, contact point, distributor, car sensor, fan resistor, ignition switch, wash motor, clock spring, car rectifier, car voltage regulator, auto electric relay, turn signal switch, window switch, etc

z******a

The design of A-TECH 2oz copper pcb is a combination of various technologies. They are mainly automation, intelligence, sensing, computer science, and mechanical engineering technologies. WGD Auto Parts specializes in the production of car electrical components such as starter brush holder, contact point, distributor, car sensor, fan resistor, ignition switch, wash motor, clock spring, car rectifier, car voltage regulator, auto electric relay, turn signal switch, window switch, etc

t******r

The product is developed by industry experts, passing thousands of stability tests. WGD Auto Parts is a professional auto parts manufacturer since 2006, leading car parts suppliers for car engine parts, chassis parts, car electrical components

Product Message

*Name

Phone

*E-mail

*Content