A-TECH  >  AI - Page Sitemap  >  A-TECH thick copper micro vias pcb factory at discount
A-TECH thick copper micro vias pcb factory at discount

A-TECH thick copper micro vias pcb factory at discount

Min Press fit hole
0.5mm
Tolerance of press fit hole
+/-2mil
Min Order Quantity
No
Production Lead Time
5-18 Working Days
Supply Capacity
10000 ㎡/Month
Certifications
UL, ISO9001, TS16949
Payment Terms
T/T, Paypal, WU etc.
Shipment Terms
EXW, FOB, DDU etc.
Test Way
100% E-Test
Standard
IPC CLASS 2 / CLASS 3
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Press fit hole PCB, or called press fit pins PCB, they’re component holes with copper plated through and with tighter tolerance than standard PTH, the tolerance of standard PTH is +/-0.075mm(3mil), but the tolerance of press fit hole is normally +/-0.05mm(2mil).

Press fit holes are used as holes to fit the leads of connectors that will not be soldered but pressed into the holes. In order to accommodate lead and hole to tightly fit together, the tolerance on both are well defined, the typical tolerances for the press fit holes depends on the type of connector that is used and it’s the connector manufacturer who specifies this.

Press fit technology reduces PCB assembly time and effort considerably, and press fit pin eliminates the need for soldering, this cuts process time and cost, and boosts production output capacity. With no need to solder modules, engineers enjoy great flexibility in design. The module can easily be mounted on top or bottom of the PCB at no extra cost and effort.

A-TECH drill press fit holes with new drill bits and control specially in manufacturing process to ensure finished hole size within tolerance as specified.




The quality of A-TECH micro vias pcb can be guaranteed by its hygienic license issued by the Health Supervision Department. Both its physical and chemical filtration systems are in line with the standards required in the pure drinking water.
A-TECH press fit pins pcb will go through a series of quality test before shipping, including salt spray, surface wear, electroplating as well as surface painting test.
All of the electrical performance parameters of A-TECH press fit pins pcb meet the industry standards. It is tested and proved that it has good discharge, capacity, and internal resistance performance.
During the production of A-TECH micro vias pcb, complete quality tests are required. It has to be tested under the testing equipment to guarantee that it is safe to be used with the phones.
A-TECH press fit pins pcb is extracted under highly scientific methods. It will go through the gravity separation process, floatation process, magnetic separation process, or chemical separation and purification.
It is quality testes under the assistance of our skilled professionals.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Please hold on and we will get back to you soon