A-TECH  >  AI - Page Sitemap  >  A-TECH hybrid via in pad pcb hot-sale for sale
A-TECH hybrid via in pad pcb hot-sale for sale

A-TECH hybrid via in pad pcb hot-sale for sale

Min Press fit hole
0.5mm
Tolerance of press fit hole
+/-2mil
Min Order Quantity
No
Production Lead Time
5-18 Working Days
Supply Capacity
10000 ㎡/Month
Certifications
UL, ISO9001, TS16949
Payment Terms
T/T, Paypal, WU etc.
Shipment Terms
EXW, FOB, DDU etc.
Test Way
100% E-Test
Standard
IPC CLASS 2 / CLASS 3
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Press fit hole PCB, or called press fit pins PCB, they’re component holes with copper plated through and with tighter tolerance than standard PTH, the tolerance of standard PTH is +/-0.075mm(3mil), but the tolerance of press fit hole is normally +/-0.05mm(2mil).

Press fit holes are used as holes to fit the leads of connectors that will not be soldered but pressed into the holes. In order to accommodate lead and hole to tightly fit together, the tolerance on both are well defined, the typical tolerances for the press fit holes depends on the type of connector that is used and it’s the connector manufacturer who specifies this.

Press fit technology reduces PCB assembly time and effort considerably, and press fit pin eliminates the need for soldering, this cuts process time and cost, and boosts production output capacity. With no need to solder modules, engineers enjoy great flexibility in design. The module can easily be mounted on top or bottom of the PCB at no extra cost and effort.

A-TECH drill press fit holes with new drill bits and control specially in manufacturing process to ensure finished hole size within tolerance as specified.




A-TECH via in pad pcb is produced under strict scrutinization. It is checked for its material ingredients as well as material extraction methods to guarantee its quality. The product undergoes the pickling and passivation process to have a glossy surface
The production of A-TECH via in pad pcb covers a few steps. The rough concentrate is deeply processed at first to extract some useful ingredients, then the concentrate is further ground for higher purity. It meets the requirement of food safety standards
High-tech processing equipment is used in the production of A-TECH via in pad pcb. It is done under the detritus equipment, grinding equipment, as well as sand-making equipment, which can guarantee high purity and fineness. The product is suitable to be applied in the food & beverage factory, restaurant, and bar
The raw materials of A-TECH buried vias pcb are treated with several procedures. Materials enrichment, refining, and smelt process will be conducted to make the materials into a product with high purity. Its base is firm enough and will not topple easily
A-TECH via in pad pcb will go through several manufacturing stages. First, the raw materials will be crushed and ground, then they are separated and concentrated to separate the waste ingredients out. 卖点、特色句]
The product is superior in quality and reliable in performance. It can be provided with a spear and coupler
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Please hold on and we will get back to you soon