A-TECH  >  AI - Page Sitemap  >  A-TECH half depth via in pad pcb manufacturers for wholesale
A-TECH half depth via in pad pcb manufacturers for wholesale

A-TECH half depth via in pad pcb manufacturers for wholesale

Min half hole
0.55mm
Profile of half hole
Routing
Surface finish
ENIG preferred
Min Order Quantity
No
Production Lead Time
5-18 Working Days
Supply Capacity
10000 ㎡/Month
Certifications
UL, ISO9001, TS16949
Payment Terms
T/T, Paypal, WU etc.
Shipment Terms
EXW, FOB, DDU etc.
Test Way
100% E-Test
Standard
IPC CLASS 2 / CLASS 3
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Plated half holes which is also called castellated holes, they’re normally designed at the edge of printed circuit boards and plated with copper, and they’re mainly used for board-on board connections, mostly where two circuit boards with different technologies are combined.

Most of the plated half hole PCBs are a type of modules which are small and high density with fine pitch components, this type of circuit boards are made with GPS Modules, Wifi Modules, Bluetooth Modules, GMS Modules, GPRS Modules and other smart modules.

Basically plated half holes are not suitable for V-score process, because the copper at the hole will be rolled up to cause serious burs, routing process is a better solution to ensure smooth edge.



The guidelines of designing plated half holes

● Normally the minimum half hole size is 0.8mm, it can be min 0.55mm with A-TECH capability
● The routing tolerance for half hole is +/-0.15mm
● The minimum distance from pad to pad is 0.25mm
● Use the larger hole diameter if possible
● Use the larger outer layer pad on both sides if possible
● Connect inner layer pads to the plated holes if possible to bring more stability and help to avoid burrs.
● Routing process is preferred and ENIG finish is preferred.



A-TECH have manufactured a large number of printed circuit boards with half hole design for various module products, and we have obtained rich experience to control high quality, the minimum half hole size we can build is 0.55mm.




A-TECH via in pad pcb fully meets international safety regulations in the tent industry as it has been tested in terms of abrasion resistance, wind resistance, and rain resistance. This product features high precision with the help of the micro-computer
The production of A-TECH press fit pins pcb meets the requirements of the green principle. For example, some of its raw materials are obtained from recycled materials. Its high-speed motor guarantees its high productivity
A-TECH via in pad pcb is manufactured by a team of engineers who are experienced in industrial refrigeration, fluid pumping, and heat transfer in the refrigeration equipment industry. This product is ensured to have no leaking problems
After the production of A-TECH via in pad pcb, it is required to go through the water test, inflatable test, air leakage test, etc, so as to guarantee its reliability. This product is renowned for its easy-to-operate structure
A-TECH via in pad pcb undergoes a variety of specialized testing and evaluation to a scope of standards both domestic and internationally in the arts and crafts industry. This product stands out for its outstanding lubricating effect
Our press fit pins pcb enjoy a good reputation from numerous customers through press fit pins pcb, press fit pins pcb and so on. The components of this product can be disassembled with little effort
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Please hold on and we will get back to you soon