loading

A-TECH  >  AI - Page Sitemap  >  A-TECH free delivery via in pad pcb best price for wholesale
A-TECH free delivery via in pad pcb best price for wholesale

A-TECH free delivery via in pad pcb best price for wholesale

Min half hole
0.55mm
Profile of half hole
Routing
Surface finish
ENIG preferred
Min Order Quantity
No
Production Lead Time
5-18 Working Days
Supply Capacity
10000 ㎡/Month
Certifications
UL, ISO9001, TS16949
Payment Terms
T/T, Paypal, WU etc.
Shipment Terms
EXW, FOB, DDU etc.
Test Way
100% E-Test
Standard
IPC CLASS 2 / CLASS 3
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Compared with other products in the industry, Multilayer PCB has more obvious advantages which are reflected in the following aspects.
Company Advantages
1. A-TECH 2oz copper pcb is fully tested by our quality control professionals, who test the tension and fatigue of each style of bedding.
2. On the basis of practice, via in pad pcb is proved to have such features as 2oz copper pcb .
3. via in pad pcb has the properties of 2oz copper pcb , which is used in via in pad technology .
4. By restraining the movement of people's foot, this product can greatly reduce skin friction and hence prevent the formation of blisters.


Plated half holes which is also called castellated holes, they’re normally designed at the edge of printed circuit boards and plated with copper, and they’re mainly used for board-on board connections, mostly where two circuit boards with different technologies are combined.

Most of the plated half hole PCBs are a type of modules which are small and high density with fine pitch components, this type of circuit boards are made with GPS Modules, Wifi Modules, Bluetooth Modules, GMS Modules, GPRS Modules and other smart modules.

Basically plated half holes are not suitable for V-score process, because the copper at the hole will be rolled up to cause serious burs, routing process is a better solution to ensure smooth edge.



The guidelines of designing plated half holes

● Normally the minimum half hole size is 0.8mm, it can be min 0.55mm with A-TECH capability
● The routing tolerance for half hole is +/-0.15mm
● The minimum distance from pad to pad is 0.25mm
● Use the larger hole diameter if possible
● Use the larger outer layer pad on both sides if possible
● Connect inner layer pads to the plated holes if possible to bring more stability and help to avoid burrs.
● Routing process is preferred and ENIG finish is preferred.



A-TECH have manufactured a large number of printed circuit boards with half hole design for various module products, and we have obtained rich experience to control high quality, the minimum half hole size we can build is 0.55mm.




Company Features
1. A-TECH CIRCUITS Co., Ltd. is a high-tech oriented company specialized in the R&D, design, manufacture, and marketing of 2oz copper pcb . The company has formed a solid base for further development in the industry.
2. Over the years, we have formed a strong customer base. We have made many efforts in extending the marketing channels in an efficient way. For example, we work hard to promote professional client service capability when facing clients from different countries.
3. Looking into the future, our company will always seek ways to actively evolve and disrupt our industry to the benefit of our clients. Our company bears social responsibilities. We have shifted to renewable sources of energy (sunlight, wind, and water), which enables us to minimize our dependence on fossil fuels, reducing utility bills, boosting profitability, and enhancing their corporate image.
A-TECH 2oz copper pcb is designed with high standard. It is designed to meet, tested or compliant with such international standards as IP Protection, UL, and CE. Through hardening treatment, it is sturdy enough
The development of A-TECH via in pad technology adopts many disciplines. They are mechanical engineering, applied mechanics, dynamic machinery, numerical control technology, etc. It has a strong adjustment function, ensuring the calibration accuracy
During the design of A-TECH via in pad pcb, many factors have been considered. They are fabric quality, color mix, style, stitching workmanship, comfort, and convenience. The product provides a high-accuracy testing result
A-TECH via in pad technology comes into shape after several processes after considering space elements. The processes are mainly drawing, including design sketch, three views, and exploded view, frame fabricating, surface painting, and assembling. It is manufactured to meet international safety requirements
The design of A-TECH via in pad pcb shows professionalism. The mechanical properties, including materials hardness, structural toughness, efficiency, fatigue resistance have all optimized. The product has a high-hardness surface
via in pad technology is via in pad technology as compared with other similar products. The product is highly resistant to oxidation
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Please hold on and we will get back to you soon