rogers aluminum pcb single sided custom made for led

Product Information of rogers aluminum pcb single sided custom made for led

Product Details

A-TECH's Aluminum PCB is processed based on advanced technology. It has excellent performances in the following details.

Company Advantages
1. The design for our aluminum pcb is simple but practical.
2. The product has a dominant influence in this field and is praised by numerous customers.
3. Its quality can be guaranteed through fully mature quality test.
4. A-TECH CIRCUITS Co., Ltd. has a complete processing equipment, advanced technology and a sound quality control system.

Microwave RF PCB, it’s also known as high frequent PCB, they use materials of excellent dielectric property for its main body with other dielectric materials and metal substrates matched to complete corresponding multi-layer processing or thick-film processing and manufacture and to achieve the transmission functions of excellent high thermal conductivity, low dielectric constant, high frequency and high speed.

The features of Microwave RF PCB

● The thermal expansivity should be the same with copper foil as much as possible, because the difference will lead toe copper foil separated in the changes of cold and heat.
● Heat resisting property, chemistry resisting, impact endurance, peel off resisting must be good.
● Water absorptivity must be low, high water absorptivity will affect DK and DF when in the wet environment
● DK should be small and stable enough, usually the smaller the better, high DK may lead to signal transmission delay
● DF should be small, which mainly affect quality of signal transmission, the smaller DF could make smaller signal wastage accordingly

The applications of Microwave RF PCB

● Microwave transmission
● Automobile telephone
● Wireless networks
● Wireless communications
● Satellite microwave communications
● 4G & 5G networks

A-TECH CIRCUITS have increased investment and intensity of research & development on Microwave high frequency PCB over the last few years to meet the continuously increasing demands. We have obtained rich knowledge and experience in professional manufacturing of various high-frequency PCBs from prototypes to production run. For main RF PCBs, such as Teflon PCB, Rogers PCB, Taconic PCB and Arlon PCB, we have sufficient inventory to ensure fast delivery.

General specification for Microwave/RF PCB in A-TECH
Layer Count	1-6
Board thickness	0.4-3.2mm
Copper thickness	0.5-3oz
Dielectric Constant(DK)	2.2-10.3
Min trace width/spacing	4/4mil
Min drill hole size	0.2mm
Surface treatment	HAL(Lead free), Immersion Gold/Tin/Silver, OSP, Gold Plating.
Material available	Teflon, Rogers, Taconic, Arlon, etc

Company Features
1. A-TECH CIRCUITS Co., Ltd. transcends among peers in the developing and manufacturing of aluminum pcb . We are notable for excellence and experience in this industry.
2. A large number of investment into the technical force in A-TECH turns out to be efficient.
3. Our business goal is to help our customers become more competitive by manufacturing products in lower-cost according to the highest established quality standards. Our commitment to going to green production promotes us to take corresponding approaches. For example, we will strive to use cleaner and some renewable energy to offset the environmental impact caused during production.

Product Message

*Name

Phone

*E-mail

*Content

Relevant Articles

What are raw materials for countersink pcb production?

If this question is asked, you will think about cost, security and performance of countersink pcb . A producer is expected to confirm the source of raw material, decrease the cost for raw material and apply innovative technology, in order to improve the performance-cost ratio. Now most of the manufacturers would examine their raw materials prior to processing. They may even invite third parties to check the materials and issue test reports. Stable partnerships with raw material suppliers are of great relevance to the countersink pcb makers. This usually means that their raw materials will be guaranteed by price, quality and quantity. A-TECH CIRCUITS Co., Ltd. is an important production base of single-sided PCB, especially single layer pcb. A-TECH's main products include osp pcb series. The product is bacteria and fungi resistant. During the cleaning stage, it has gone through antibacterial and sterilization treatment, and the surface is finely polished to a very smooth level, which can effectively kill the bacteria. Thanks to the up-to-date vacuum DES line, it is manufactured with fine traces and high density. It can be provided in various sizes and color depending on the customer’s requirements. A smooth part is added on its PTH line to reduce the roughness of through hole.We want to be a trusted partner, providing our customers with high-quality services and offering them the best possible support.

What properties are needed in countersink pcb raw materials?

The raw materials should have the properties that contribute to the overall performance and quality of the product itself and the production process. The raw materials also should not do harm to workers, and damage equipment and the environment seriously during processing. countersink pcb manufacturers should carefully test their raw materials to see if they meet the production requirements and safety and quality standards and if they have the desired properties that benefit the usability and durability of countersink pcb . The tight network of production bases, sales and service training stations of A-TECH CIRCUITS Co., Ltd. is throughout the country. A-TECH's main products include blind vias pcb series. The product is easy to wipe clean. The materials used features enough airtightness, which creates a barrier on the surface for the dust to get in. With a compact design, it is space-saving. It is available in varied specification as per the different demands of the clients. It has high tensile strength and can be deformed without breakage.Our core value is to listen to our customers' concerns and provide them with all our support to meet their needs.

How much will it take for countersink pcb materials?

Cost is a critical factor to consider when selecting materials. In addition to the basic purchasing cost, there are many additional costs associated with countersink pcb materials, such as the costs in inspection & testing, transport, warehousing, labor. Although the overall cost of materials makes up of so many parts, it is variable as it changes along with production volumes. Sourcing and using materials cost-effectively can be a competitive advantage, thus countersink pcb manufacturers always monitor and optimize their materials expenses strictly. A-TECH CIRCUITS Co., Ltd. is a domestic key enterprise in osp pcb production. A-TECH's main products include single-sided PCB series. A-TECH impedance calculator pcb will strictly be scrutinized in every production stage by the QC team to check whether the quality is in line with standards in gift&crafts indusrty, so as to make sure the qualified rate of the finished product reaches 100%. It can reduce the electrical signal loss and provides the highest efficiency. Over the years A-TECH has won the trust and recognition of consumers. With a compact design, it is space-saving.For our company, every aspect of sustainability is important. We work to ensure that we are fulfilling our duty in the industry to create shared value for our employees, shareholders, local communities, and general society.

How much will it cost for countersink pcb production?

The cost of manufacturing countersink pcb is determined by several factors. Among those, labor cost and technology fee account for a considerable proportion. Throughout the whole production process, a lot of staff involving innovative designers, capable R&D technicians, and experienced workers work with their full passion and professionalism. In addition, the investment in the technology updates is also an indispensable part because it contributes a lot to the improved production efficiency and precision. A-TECH CIRCUITS Co., Ltd. has occupied the leading position in single-sided PCB field for years and remain highly marketable for its single layer pcb. A-TECH's main products include osp pcb series. A-TECH blind vias pcb is professionally designed. It is carried out by our designers who know about jewelry ring and setting basics and understand the essentials of jewelry design. It is 100% produced in accordance with IPC-6012 & IPC-A-600F standards. As well, clientele can purchase this product from us at low market prices. It is extremely popular in the markets of Europe, North America, and Asia.One of our main priorities is to generate greater value for our customers and continue expanding the business between us.

Rogers aluminum pcb single sided custom made for led