fit hole edge plating pcb best price at discount

Product Information of fit hole edge plating pcb best price at discount A-TECH

Enterprise Strength

A comprehensive after-sales service system is established based on customers' needs. We are committed to providing quality services including consulting, technical guidance, product delivery, product replacement and so on. This enables us to establish a good corporate image.

Product Comparison

A-TECH's Aluminum PCB has the following advantages over other similar products.

Company Advantages
1. A-TECH 2oz copper pcb is designed by the professional CAD designers who have created a specific CAD drawing library for wooden doors. It will be produced under the guideline of a stereoanatomic drawing with specific dimensional requirements and materials details.
2. It is proved by practice that edge plating pcb has the virtues of 2oz copper pcb .
3. It is show by running and practice that edge plating pcb has performance characteristics as: 2oz copper pcb .
4. Our edge plating pcb has passed all relative certificates in this industry.

Plated half holes which is also called castellated holes, they’re normally designed at the edge of printed circuit boards and plated with copper, and they’re mainly used for board-on board connections, mostly where two circuit boards with different technologies are combined.

Most of the plated half hole PCBs are a type of modules which are small and high density with fine pitch components, this type of circuit boards are made with GPS Modules, Wifi Modules, Bluetooth Modules, GMS Modules, GPRS Modules and other smart modules.

Basically plated half holes are not suitable for V-score process, because the copper at the hole will be rolled up to cause serious burs, routing process is a better solution to ensure smooth edge.

The guidelines of designing plated half holes

● Normally the minimum half hole size is 0.8mm, it can be min 0.55mm with A-TECH capability
● The routing tolerance for half hole is +/-0.15mm
● The minimum distance from pad to pad is 0.25mm
● Use the larger hole diameter if possible
● Use the larger outer layer pad on both sides if possible
● Connect inner layer pads to the plated holes if possible to bring more stability and help to avoid burrs.
● Routing process is preferred and ENIG finish is preferred.

A-TECH have manufactured a large number of printed circuit boards with half hole design for various module products, and we have obtained rich experience to control high quality, the minimum half hole size we can build is 0.55mm.

Company Features
1. A-TECH CIRCUITS Co., Ltd. has never been surpassed in technology and quality.
2. A-TECH CIRCUITS Co., Ltd. has a strong technical force and perfect after-sales service capabilities.
3. A-TECH CIRCUITS Co., Ltd. continuously improves and perfects the integrated design manufacturing service process in order to become a differentiated international company. Get an offer! A-TECH CIRCUITS Co., Ltd. aims to lead edge plating pcb industry. Get an offer! A-TECH CIRCUITS Co., Ltd. will keep going in the hope of accomplishing mutual benefit and common growth with the support from our customers as since always. Get an offer!

Product Message

*Name

Phone

*E-mail

*Content

Relevant Articles

What are raw materials for countersink pcb production?

If this question is asked, you will think about cost, security and performance of countersink pcb . A producer is expected to confirm the source of raw material, decrease the cost for raw material and apply innovative technology, in order to improve the performance-cost ratio. Now most of the manufacturers would examine their raw materials prior to processing. They may even invite third parties to check the materials and issue test reports. Stable partnerships with raw material suppliers are of great relevance to the countersink pcb makers. This usually means that their raw materials will be guaranteed by price, quality and quantity. A-TECH CIRCUITS Co., Ltd. is an important production base of single-sided PCB, especially single layer pcb. A-TECH's main products include osp pcb series. The product is bacteria and fungi resistant. During the cleaning stage, it has gone through antibacterial and sterilization treatment, and the surface is finely polished to a very smooth level, which can effectively kill the bacteria. Thanks to the up-to-date vacuum DES line, it is manufactured with fine traces and high density. It can be provided in various sizes and color depending on the customer’s requirements. A smooth part is added on its PTH line to reduce the roughness of through hole.We want to be a trusted partner, providing our customers with high-quality services and offering them the best possible support.

What properties are needed in countersink pcb raw materials?

The raw materials should have the properties that contribute to the overall performance and quality of the product itself and the production process. The raw materials also should not do harm to workers, and damage equipment and the environment seriously during processing. countersink pcb manufacturers should carefully test their raw materials to see if they meet the production requirements and safety and quality standards and if they have the desired properties that benefit the usability and durability of countersink pcb . The tight network of production bases, sales and service training stations of A-TECH CIRCUITS Co., Ltd. is throughout the country. A-TECH's main products include blind vias pcb series. The product is easy to wipe clean. The materials used features enough airtightness, which creates a barrier on the surface for the dust to get in. With a compact design, it is space-saving. It is available in varied specification as per the different demands of the clients. It has high tensile strength and can be deformed without breakage.Our core value is to listen to our customers' concerns and provide them with all our support to meet their needs.

How much will it take for countersink pcb materials?

Cost is a critical factor to consider when selecting materials. In addition to the basic purchasing cost, there are many additional costs associated with countersink pcb materials, such as the costs in inspection & testing, transport, warehousing, labor. Although the overall cost of materials makes up of so many parts, it is variable as it changes along with production volumes. Sourcing and using materials cost-effectively can be a competitive advantage, thus countersink pcb manufacturers always monitor and optimize their materials expenses strictly. A-TECH CIRCUITS Co., Ltd. is a domestic key enterprise in osp pcb production. A-TECH's main products include single-sided PCB series. A-TECH impedance calculator pcb will strictly be scrutinized in every production stage by the QC team to check whether the quality is in line with standards in gift&crafts indusrty, so as to make sure the qualified rate of the finished product reaches 100%. It can reduce the electrical signal loss and provides the highest efficiency. Over the years A-TECH has won the trust and recognition of consumers. With a compact design, it is space-saving.For our company, every aspect of sustainability is important. We work to ensure that we are fulfilling our duty in the industry to create shared value for our employees, shareholders, local communities, and general society.

How much will it cost for countersink pcb production?

The cost of manufacturing countersink pcb is determined by several factors. Among those, labor cost and technology fee account for a considerable proportion. Throughout the whole production process, a lot of staff involving innovative designers, capable R&D technicians, and experienced workers work with their full passion and professionalism. In addition, the investment in the technology updates is also an indispensable part because it contributes a lot to the improved production efficiency and precision. A-TECH CIRCUITS Co., Ltd. has occupied the leading position in single-sided PCB field for years and remain highly marketable for its single layer pcb. A-TECH's main products include osp pcb series. A-TECH blind vias pcb is professionally designed. It is carried out by our designers who know about jewelry ring and setting basics and understand the essentials of jewelry design. It is 100% produced in accordance with IPC-6012 & IPC-A-600F standards. As well, clientele can purchase this product from us at low market prices. It is extremely popular in the markets of Europe, North America, and Asia.One of our main priorities is to generate greater value for our customers and continue expanding the business between us.

Fit hole edge plating pcb best price at discount A-TECH