loading

A-TECH  >  AI - Page Sitemap  >  A-TECH led pcb custom made for wholesale
A-TECH led pcb custom made for wholesale

A-TECH led pcb custom made for wholesale

Layer
2
Material
Taconic RF35
Min Order Quantity
No
Production Lead Time
4-15 Working Days
Supply Capacity
2000 ㎡/Month
Certifications
UL, ISO9001, TS16949
Payment Terms
T/T, Paypal, WU etc.
Shipment Terms
EXW, FOB, DDU etc.
Test Way
100% E-Test
Standard
IPC CLASS 2 / CLASS 3
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Compared with other products in the same category, Aluminum PCB has the following competitive advantages.
  • v s
Company Advantages
1. When designing A-TECH HDI pcb manufacturer , many important factors have been taken into consideration. These factors are abrasion, adhesion, colorfastness, and dimensional stability.
2. This product takes only microseconds to achieve its full brightness. It is cycled between on and off frequently and it won't burn out quickly.
3. The product is considered to have high market value and has a good market prospect.


Microwave RF PCB, it’s also known as high frequent PCB, they use materials of excellent dielectric property for its main body with other dielectric materials and metal substrates matched to complete corresponding multi-layer processing or thick-film processing and manufacture and to achieve the transmission functions of excellent high thermal conductivity, low dielectric constant, high frequency and high speed.



The features of Microwave RF PCB

● The thermal expansivity should be the same with copper foil as much as possible, because the difference will lead toe copper foil separated in the changes of cold and heat.
● Heat resisting property, chemistry resisting, impact endurance, peel off resisting must be good.
● Water absorptivity must be low, high water absorptivity will affect DK and DF when in the wet environment
● DK should be small and stable enough, usually the smaller the better, high DK may lead to signal transmission delay
● DF should be small, which mainly affect quality of signal transmission, the smaller DF could make smaller signal wastage accordingly



The applications of Microwave RF PCB

● Microwave transmission
● Automobile telephone
● Wireless networks
● Wireless communications
● Satellite microwave communications
● 4G & 5G networks



A-TECH CIRCUITS have increased investment and intensity of research & development on Microwave high frequency PCB over the last few years to meet the continuously increasing demands. We have obtained rich knowledge and experience in professional manufacturing of various high-frequency PCBs from prototypes to production run. For main RF PCBs, such as Teflon PCB, Rogers PCB, Taconic PCB and Arlon PCB, we have sufficient inventory to ensure fast delivery.



General specification for Microwave/RF PCB in A-TECH
Layer Count1-6
Board thickness0.4-3.2mm
Copper thickness0.5-3oz
Dielectric Constant(DK)2.2-10.3
Min trace width/spacing4/4mil
Min drill hole size0.2mm
Surface treatmentHAL(Lead free), Immersion Gold/Tin/Silver, OSP, Gold Plating.
Material availableTeflon, Rogers, Taconic, Arlon, etc




Company Features
1. A-TECH CIRCUITS Co., Ltd. has been recognized for decades as a industry leader in the development of led pcb .
2. The professional technician's resources have become the key factor in our success. Those technicians are well-cultivated in terms of industry know-how and technical knowledge, which enables them to design and produce valuable and market-oriented products.
3. Innovation is our current business development focus. We encourage innovation must be agile, focuses on meeting customers' unmet needs rather than doing innovation all for ourselves. Our goal is to hand over the finest products to our customers. For this, we use the best designing ethics to produce cost-effective yet practical products. We will rely on innovation to enlarge our business scale. We will try to develop entirely new products to go ahead of peer competitors and meet rapidly changing customer needs.
HDI pcb manufacturer is led pcb, thus realizing the hope of led pcb.
led pcb produced by A-TECH CIRCUITS Co., Ltd. are chiefly characterized by their HDI pcb manufacturer.
For its material, we used HDI pcb manufacturer that was typical for led pcb because it is HDI pcb manufacturer.
HDI pcb manufacturer tend to be HDI pcb manufacturer than other brands.
led pcb are likely to possess features likeled pcb.
HDI pcb manufacturer Made of high-quality raw materials, it has good stain resistance, mildew and algae resistance, can keep the wall smooth and clean for a long time, and effectively inhibits the growth of mold and algae.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Please hold on and we will get back to you soon