Wholesale fr4 1.6 mm flexible for business at discount

Latest products

4 layers PCB with IPC CLASS3 acceptance standard

4 layers PCB with SHENGYI S1000-2

4 layers PCB with impedance control

4 layers PCB with ENIG finish

Product Information
Feedback

Company Advantages
1. When designing A-TECH , many important factors have been taken into consideration. These factors are abrasion, adhesion, colorfastness, and dimensional stability. It is 100% produced in accordance with IPC-6012 & IPC-A-600F standards
2. This product has gained much popularity since it was launched. It is characterized by high thermal conductivity and good heat dissipation
3. This product is widely available in the global market and is likely to be used more in the future. It can reduce the electrical signal loss and provides the highest efficiency
4. The product is 100% qualified as our quality control program has eliminated all defects. It totally conforms to the UL Flame Rating of 94V-0

Double sided PCB have two copper layers that can be connected by a copper plated hole, solder mask and idents can also be added on both of top and bottom side, it’s the most popular type of printed circuit boards in industry and it has the highest proportion of demands in the worldwide market.

Double sided printed circuit boards can be used for both through hole and surface mount components, the components can be assembled on both of top and bottom side, so you don’t need to worry about where to put components on the circuit boards, and not need to use through hole components which is usually expensive than SMD one. They’re widely used in different applications, such as power supplies, industrial controls, automotive, LED lighting and many more.

A-TECH flexible fr4 1.6 mm for business at discount-1

The benefit of double sided PCB

● Increased circuit density
● More flexibility for designers
● Relatively lower costs
● Reduced board size(which can reduce costs)
● Intermediate level of circuit complexity

A-TECH started manufacturing double sided PCB since 2003 and there is 15 years’ experience so far, it’s one of our core business with high fabrication proportion. We’re able to offer 24 hours quick turn service for prototype PCB of double sided and 2 ~ 5 days fast lead time for small to medium volume order, moreover, the longest board size for 2 layers PCB we can fabricate reach 1.5 meters.

General Specification for double sided PCB in A-TECH
Layer Count	2 Layer
Material Available	CEM3, FR4, High Tg FR4, AL base, PI, Teflon, Taconic, Arlon, Rogers.
Max board size	510*1500mm
Board thickness	0.4-3.2mm
Finished copper thickness	1-6oz
Min trace width/spacing	4/4mil
Min hole size	0.2mm
Colour of Solder Mask	Green, Blue, White, Black, Yellow, Red.
Colour of Silkscreen	White, Black, Yellow.
Surface treatment	HASL, HAL(Lead free), OSP, Gold Plating, Immersion Gold/Tin/Silver, Carbon, Peelable Mask.

Company Features
1. For many years, A-TECH CIRCUITS Co., Ltd. has been dedicated to the manufacture of . We have become one of the leading enterprises in the industry. A-TECH CIRCUITS Co., Ltd. is greatly supported in technology from our professional R&D base.
2. With our strong technological backing, A-TECH CIRCUITS Co., Ltd. is prepared for the future by building a strong foundation today.
3. A-TECH has employeed professional technicians who have rich experience in producing fr4 1.6 mm . Through inventive processes, we provide unmatched value to our customers. We foster creative work environments where we always challenge ourselves to improve our processes and procedures. Call!

i******h

A-TECH fr4 1.6 mm undergoes electrical safety tests. These tests cover an electrical testing, high current bond test, insulation test, leakage current test, and load test. This product is able to direct natural light and has good quality

s******g

The raw materials used for A-TECH fr4 1.6 mm are non-toxic, non-allergenic, and non-carcinogenic. And they have been sterilized in the manufacturing process. Its perfectly smooth edges make it safe to wear

o******y

A-TECH fr4 1.6 mm has gone through a series of tests. It is tested for impact resistance, flexural strength, low porosity, and resistance to acids and wears. Its perfectly smooth edges make it safe to wear

g******w

A-TECH fr4 1.6 mm is manufactured adopting the latest energy-conserving technologies. It has been certified under China CECP, a domestic energy keeping certification which aims to verify its energy efficiency level. Professionally painted, this product is less likely to discolor

w******q

Exclusive use of high quality materials is anticipated in the manufacturing processes of A-TECH fr4 1.6 mm. These materials are pinpointed through direct experience and selected from among the best and most innovative on the market. This product is marked by its strong resistance to corrosion

i******z

It is less likely to accumulate water stains. Designed with a hydrophobic property, it can effectively drain the water away from its surface. This product is highly resistant to scratches

Product Message

*Name

Phone

*E-mail

*Content

A-TECH flexible fr4 1.6 mm for business at discount