loading

A-TECH  >  AI - Page Sitemap  >  A-TECH aluminum single-sided PCB multi-layer
A-TECH aluminum single-sided PCB multi-layer

A-TECH aluminum single-sided PCB multi-layer

Layer
2
Material
Taconic RF35
Min Order Quantity
No
Production Lead Time
4-15 Working Days
Supply Capacity
2000 ㎡/Month
Certifications
UL, ISO9001, TS16949
Payment Terms
T/T, Paypal, WU etc.
Shipment Terms
EXW, FOB, DDU etc.
Test Way
100% E-Test
Standard
IPC CLASS 2 / CLASS 3
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. A-TECH PCB prototyping has passed the conducted basic physical tests including tensile property, elongation, rub fastness, flexing, stitch tear, and tongue tear strength. Being laminated by advanced vacuum lamination equipment, it has a uniform dielectric thickness after lamination
2. People can believe the fact that by using this product, the return to their pockets through savings on electricity bills will only increase. It is widely used in different electronics industries, such as telecommunication and consumer electronics
3. The product can work flawlessly. It has a precise and advanced control system, which allows it to operate with high accuracy under the given instructions. The product is certified under UL(E357001) and RoHS
4. The fabric this product is made of makes it soft and cuddly, and can maintain its original size as time goes on. It can reduce the electrical signal loss and provides the highest efficiency


Microwave RF PCB, it’s also known as high frequent PCB, they use materials of excellent dielectric property for its main body with other dielectric materials and metal substrates matched to complete corresponding multi-layer processing or thick-film processing and manufacture and to achieve the transmission functions of excellent high thermal conductivity, low dielectric constant, high frequency and high speed.



The features of Microwave RF PCB

● The thermal expansivity should be the same with copper foil as much as possible, because the difference will lead toe copper foil separated in the changes of cold and heat.
● Heat resisting property, chemistry resisting, impact endurance, peel off resisting must be good.
● Water absorptivity must be low, high water absorptivity will affect DK and DF when in the wet environment
● DK should be small and stable enough, usually the smaller the better, high DK may lead to signal transmission delay
● DF should be small, which mainly affect quality of signal transmission, the smaller DF could make smaller signal wastage accordingly



The applications of Microwave RF PCB

● Microwave transmission
● Automobile telephone
● Wireless networks
● Wireless communications
● Satellite microwave communications
● 4G & 5G networks



A-TECH CIRCUITS have increased investment and intensity of research & development on Microwave high frequency PCB over the last few years to meet the continuously increasing demands. We have obtained rich knowledge and experience in professional manufacturing of various high-frequency PCBs from prototypes to production run. For main RF PCBs, such as Teflon PCB, Rogers PCB, Taconic PCB and Arlon PCB, we have sufficient inventory to ensure fast delivery.



General specification for Microwave/RF PCB in A-TECH
Layer Count1-6
Board thickness0.4-3.2mm
Copper thickness0.5-3oz
Dielectric Constant(DK)2.2-10.3
Min trace width/spacing4/4mil
Min drill hole size0.2mm
Surface treatmentHAL(Lead free), Immersion Gold/Tin/Silver, OSP, Gold Plating.
Material availableTeflon, Rogers, Taconic, Arlon, etc




Company Features
1. Our friendly project management team has a wealth of experience and knowledge of the industries. They are familiar with culture and language in the target market. They can provide expert advice throughout the order process.
2. Our company is working hard to reduce the impact of our activities and of our products on future generations. We make full use of the sourced resources during the production and extend the products' life. By doing this, we have confidence in building a clean and pollution-free environment for the next generations. Inquire!
A-TECH PCB prototyping is thoroughly tested. Both its physical properties such as shrinkage rate for cloth, resilience, and fabric stiffness and chemical properties such as formaldehyde and PH content are required to meet the specific standards. It typically utilizes a diagonal weave that enhances strength
A-TECH single-sided PCB is produced after several stages. It has to go through a mining process which includes the ore crushing, grinding, and refining. It keeps stuff protected from outdoor elements like rain and snow
The production process of A-TECH single-sided PCB is under the real-time monitor. It has gone through various quality tests including tests on the effect of compressed air and condenser water. Made of slightly flexible fabric such as 600D polyester, it is not easily punctured
A-TECH single-sided PCB is developed after careful consideration. It is created based on the theory of maximum heat dissipation for devices by our in-house R&D department. This product will be carefully packaged with a Polybag
A-TECH single-sided PCB is manufactured by adopting the following methods: injection molding, compression molding, and extrusion which require highly accurate single or multi-cavity molds. The overall weight of this product will not impose much weight on one's back
The fabric of this product is known for strength and durability. It has a super soft weave and a subtle sheen with high-quality fiber. The overall weight of this product will not impose much weight on one's back
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Please hold on and we will get back to you soon