A-TECH  >  AI - Page Sitemap  >  A-TECH aluminum quick turn pcb prototype custom made
A-TECH aluminum quick turn pcb prototype custom made

A-TECH aluminum quick turn pcb prototype custom made

Layer
2
Material
Taconic RF35
Min Order Quantity
No
Production Lead Time
4-15 Working Days
Supply Capacity
2000 ㎡/Month
Certifications
UL, ISO9001, TS16949
Payment Terms
T/T, Paypal, WU etc.
Shipment Terms
EXW, FOB, DDU etc.
Test Way
100% E-Test
Standard
IPC CLASS 2 / CLASS 3
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Multilayer PCB has the following differentiated advantages compared with other products in the same category.
Enterprise Strength
  • A-TECH always gives priority to customers and services. We continuously provide excellent services for numerous customers.
Company Advantages
1. A-TECH flexible printed circuit board is produced in fast and accurate flexibility of production methods.
2. This product does not generate harmonics that have a great influence on the quality of the illumination. The LED driver circuit and the rectifier filter circuit are all improved.
3. Even people wear this product for a long time, they can hardly find any pilling or shrinkage problems. This will be a worthy investment.


Microwave RF PCB, it’s also known as high frequent PCB, they use materials of excellent dielectric property for its main body with other dielectric materials and metal substrates matched to complete corresponding multi-layer processing or thick-film processing and manufacture and to achieve the transmission functions of excellent high thermal conductivity, low dielectric constant, high frequency and high speed.



The features of Microwave RF PCB

● The thermal expansivity should be the same with copper foil as much as possible, because the difference will lead toe copper foil separated in the changes of cold and heat.
● Heat resisting property, chemistry resisting, impact endurance, peel off resisting must be good.
● Water absorptivity must be low, high water absorptivity will affect DK and DF when in the wet environment
● DK should be small and stable enough, usually the smaller the better, high DK may lead to signal transmission delay
● DF should be small, which mainly affect quality of signal transmission, the smaller DF could make smaller signal wastage accordingly



The applications of Microwave RF PCB

● Microwave transmission
● Automobile telephone
● Wireless networks
● Wireless communications
● Satellite microwave communications
● 4G & 5G networks



A-TECH CIRCUITS have increased investment and intensity of research & development on Microwave high frequency PCB over the last few years to meet the continuously increasing demands. We have obtained rich knowledge and experience in professional manufacturing of various high-frequency PCBs from prototypes to production run. For main RF PCBs, such as Teflon PCB, Rogers PCB, Taconic PCB and Arlon PCB, we have sufficient inventory to ensure fast delivery.



General specification for Microwave/RF PCB in A-TECH
Layer Count1-6
Board thickness0.4-3.2mm
Copper thickness0.5-3oz
Dielectric Constant(DK)2.2-10.3
Min trace width/spacing4/4mil
Min drill hole size0.2mm
Surface treatmentHAL(Lead free), Immersion Gold/Tin/Silver, OSP, Gold Plating.
Material availableTeflon, Rogers, Taconic, Arlon, etc




Company Features
1. A-TECH CIRCUITS Co., Ltd. is a leading quick turn pcb prototype manufacturer with its own R&D team, advanced production equipment and deep production experience.
2. The factory has implemented a strict production control system for years. This system stipulates requirements for workmanship, energy resources utilization, and waste treatment, which enables the factory to regulate all of the production processes.
3. We are working hard to manufacture green products so as to support environmental friendliness. We will use materials that do not contribute to environmental degradation or use recycled materials. To go on sustainable development, we have constantly upgraded our production method and introduced advanced facilities to effectively control emissions. We work systematically to ensure that our suppliers share our values and adhere to our standards of business ethics, health & safety, environmental, and social responsibility as specified in our Business Partner Code of Conduct.
The creation of A-TECH quick turn pcb prototype is in line with international electrical safety standards. It meets the requirements of IEC, EMC, CE marking, etc. It is manufactured to have stable chemical properties
The quality of A-TECH flexible printed circuit board is monitored by inspectors and testers. Its individual parts such as the motor, engine, and hydraulic system all tested to meet the standards set by the company. The product goes through several inspections before delivery with defects removed
A-TECH quick turn pcb prototype is manufactured with high-quality mechanical components. They are the sophisticated engine, turbine, power transmission equipment, gears, speed changers, clutches, drive chains, generators, and the like. Its manufacturing meets the international quality standards
A-TECH quick turn pcb prototype has to go through diverse tests. These tests are strictly conducted in terms of stress points, support points, yield points, wear resistance, toughness, friction force, etc. Its design is supported by the professional project engineers who follow up the specific progress
Manufacturing A-TECH flexible printed circuit board requires different facilities. It is processed under stamping, coating, painting and drying equipment with high performance and high efficiency. The product can be applied in many industries, such as the automobile, house appliance, and medical industry
Strict quality control process ensures zero defects and consistent quality. Fast shipment is guaranteed for the product to improve customer satisfaction
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Please hold on and we will get back to you soon