A-TECH  >  AI - Page Sitemap  >  A-TECH aluminum microwave rf pcb double sided for wholesale
A-TECH aluminum microwave rf pcb double sided for wholesale

A-TECH aluminum microwave rf pcb double sided for wholesale

Layer
2
Material
Taconic RF35
Min Order Quantity
No
Production Lead Time
4-15 Working Days
Supply Capacity
2000 ㎡/Month
Certifications
UL, ISO9001, TS16949
Payment Terms
T/T, Paypal, WU etc.
Shipment Terms
EXW, FOB, DDU etc.
Test Way
100% E-Test
Standard
IPC CLASS 2 / CLASS 3
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. A-TECH HDI pcb manufacturer is developed and constantly improved regarding its technical and aesthetic performance, making it perfectly meet the requirements in the sanitary ware industry. It can be printed with numbers, names, data codes, logos, or other specific information
2. It showcases the perfect blend of craftsmanship and elegance, designed to provide users with a unique and refined sleep experience. Being laminated by advanced vacuum lamination equipment, it has a uniform dielectric thickness after lamination
3. This product is of fine workmanship. The edge banding is fine and smooth with excellent hand feeling, and the line of symmetry is straight. With a solder mask, it enjoys a good electrical insulation property
4. The product is not susceptible to shrink. The fabrics used have been pre-shrunk to make the shrinkage tendency to the minimal level. A smooth part is added on its PTH line to reduce the roughness of through hole


Microwave RF PCB, it’s also known as high frequent PCB, they use materials of excellent dielectric property for its main body with other dielectric materials and metal substrates matched to complete corresponding multi-layer processing or thick-film processing and manufacture and to achieve the transmission functions of excellent high thermal conductivity, low dielectric constant, high frequency and high speed.



The features of Microwave RF PCB

● The thermal expansivity should be the same with copper foil as much as possible, because the difference will lead toe copper foil separated in the changes of cold and heat.
● Heat resisting property, chemistry resisting, impact endurance, peel off resisting must be good.
● Water absorptivity must be low, high water absorptivity will affect DK and DF when in the wet environment
● DK should be small and stable enough, usually the smaller the better, high DK may lead to signal transmission delay
● DF should be small, which mainly affect quality of signal transmission, the smaller DF could make smaller signal wastage accordingly



The applications of Microwave RF PCB

● Microwave transmission
● Automobile telephone
● Wireless networks
● Wireless communications
● Satellite microwave communications
● 4G & 5G networks



A-TECH CIRCUITS have increased investment and intensity of research & development on Microwave high frequency PCB over the last few years to meet the continuously increasing demands. We have obtained rich knowledge and experience in professional manufacturing of various high-frequency PCBs from prototypes to production run. For main RF PCBs, such as Teflon PCB, Rogers PCB, Taconic PCB and Arlon PCB, we have sufficient inventory to ensure fast delivery.



General specification for Microwave/RF PCB in A-TECH
Layer Count1-6
Board thickness0.4-3.2mm
Copper thickness0.5-3oz
Dielectric Constant(DK)2.2-10.3
Min trace width/spacing4/4mil
Min drill hole size0.2mm
Surface treatmentHAL(Lead free), Immersion Gold/Tin/Silver, OSP, Gold Plating.
Material availableTeflon, Rogers, Taconic, Arlon, etc




Company Features
1. With years of growth, A-TECH CIRCUITS Co., Ltd. has been competent in designing and manufacturing high-quality HDI pcb manufacturer and gained abundant experience.
2. Basing on scientific management and strict quality testing system, the factory strictly control the production procedures. The factory requires all of the raw materials and manufacturing parts to be inspected and tested by specific machinery.
3. Our consistent pursuit is to provide each customer with high quality microwave rf pcb . Welcome to visit our factory!
A-TECH microwave rf pcb has undergone workmanship assessment to ensure that the stitching, construction, and embellishments can meet the needs of customers. Staff working in Jiabang are all well-trained
The production of A-TECH HDI pcb manufacturer meets the requirements of the green principle. For example, some of its raw materials are obtained from recycled materials. Foshan Jiabang Garden Supplies Co., Ltd set up in 2004
A-TECH microwave rf pcb is designed and manufactured with the highest technical and quality standards that are commonly required in the sanitary ware industry. we can provide OEM service for customers
A-TECH microwave rf pcb has to go through five basic production processes: raw material extraction, compounds mixture, forming, cutting, and final surface treatment. It's a leading company in the industry of decking tiles in China
The quality of A-TECH HDI pcb manufacturer is attached great importance during the production process. Probabilistic computing method is adopted to inspect the quality stability of its electronic components. Our good products win us many distinguished customers, such as Build Direct in US, Clas Olhson in Sweden
The product has excellent flexibility and endurance. It is able to repeat the movement for thousands of times without malfunction. Different from traditional decking tiles, we use high-quality plastic base and all types of surface materials
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Please hold on and we will get back to you soon